BJ4101 Sagittal saw(System 4000)
Original price was: $2,457.00.$2,041.00Current price is: $2,041.00.
– The BJ4101 Sagittal saw is ideal for cutting bone during joint surgery
– Features an autoclavable design with imported motor for low noise operation
– Comes with a variety of blade length and thickness options, customizable to fit your needs
– Warranty includes 2 years for handpiece and 3 months for other consumable items
Description
BJ4101 Sagittal Saw (System 4000)
High-performance sagittal saw engineered for precise bone cutting in joint arthroplasty and reconstructive procedures. Features fully autoclavable design with imported motor technology, delivering low-noise operation up to 16,000 oscillations per minute. Ergonomic handpiece design ensures optimal control and minimal soft tissue trauma during demanding orthopedic cases.
Clinical overview
The BJ4101 Sagittal Saw is specifically designed for bone cutting applications in joint surgery, including total knee arthroplasty, total hip arthroplasty, and complex reconstructive procedures. The system delivers controlled oscillating motion up to 16,000 oscillations per minute, enabling precise bone resection while minimizing thermal necrosis and soft tissue damage. The ergonomic handpiece design reduces surgeon fatigue during extended procedures and provides superior tactile feedback for enhanced cutting control.
Built on the proven System 4000 platform, this sagittal saw features a fully autoclavable construction that withstands repeated sterilization cycles up to 155°C. The imported motor technology ensures consistent performance with minimal noise generation (≤75dB), creating a more comfortable operating room environment. The 14.4V battery system provides reliable power throughout demanding cases, while the environmentally friendly nickel-metal hydride battery technology supports sustainable surgical practices.
Key features & surgeon benefits
Comprehensive blade selection
- Multiple blade lengths available: 70mm, 90mm, and 100mm for varied anatomical access
- Thickness options from 0.8mm to 1.27mm accommodate different bone densities and cutting requirements
- Custom blade configurations available to match specific surgical techniques and preferences
- Medical-grade stainless steel blades ensure durability and consistent cutting performance
Streamlined surgical efficiency
- High oscillation rate (0-16,000 osc/min) enables rapid, precise bone cuts with minimal passes
- Ergonomic handpiece design reduces hand fatigue during extended procedures
- Low noise operation (≤75dB) improves OR communication and reduces staff stress
- Fully autoclavable design eliminates complex cleaning protocols and accelerates turnover
Long-term value proposition
- 2-year handpiece warranty significantly reduces total cost of ownership
- Durable construction withstands repeated sterilization cycles up to 155°C
- Environmentally friendly nickel-metal hydride battery technology reduces replacement costs
- Output power ≥100W ensures consistent performance throughout product lifecycle
Tailored to your practice
- Custom blade lengths and thicknesses available to match specific surgical protocols
- OEM partnerships supported for high-volume institutional requirements
- Aseptic battery transfer ring included for sterile field battery exchange
- Complete system configuration adaptable to existing System 4000 infrastructure
Technical specifications
| Indications | Bone cutting during joint surgery, arthroplasty, orthopedic reconstruction |
|---|---|
| Sizes / range | Blade lengths: 70mm, 90mm, 100mm | Blade thickness: 0.8mm, 1.0mm, 1.2mm, 1.27mm (customizable) |
| Material | Medical-grade stainless steel (blades), autoclavable surgical-grade materials (handpiece) |
| Output power | ≥100W |
| Oscillations | 0-16,000 osc/min (variable speed control) |
| Operating voltage | 14.4V (nickel-metal hydride battery) |
| Noise level | ≤75dB |
| Sterilisation | Autoclavable up to 155°C, 1.6 MPa pressure |
| Packaging | Complete system with protective case |
| Warranty | Handpiece: 2 years | Battery and consumables: 3 months |
Standard instrument composition
| Item | Description | Qty |
|---|---|---|
| Handpiece | BJ4101 Sagittal Saw handpiece, fully autoclavable | 1 |
| Battery | 14.4V nickel-metal hydride rechargeable battery | 1 |
| Charger | Battery charging unit with power adapter | 1 |
| Saw blade | Sagittal saw blade (length and thickness as specified) | 1 |
| Aseptic battery transfer ring | Sterile battery exchange system for intraoperative use | 1 |
| Operating manual | Comprehensive user instructions and maintenance guide | 1 |
| Guarantee card | Warranty documentation and registration card | 1 |
Important usage notes
- Sterilization protocol: Autoclave at ≤155°C maximum. Exceeding this temperature may damage motor components.
- Battery management: Remove battery from handpiece after each procedure to prevent discharge and extend battery life. Battery unit is NOT autoclavable.
- Post-operative cleaning: Clean saw blades immediately after surgery using appropriate irrigation to prevent blood adhesion. Ensure complete drying before storage.
- Handpiece care: Ensure battery compartment is completely dry after sterilization before inserting battery.
- Blade maintenance: Medical stainless steel blades are designed for optimal flexibility to prevent breakage. Single-use per procedure recommended for consistent performance.
- Environmental considerations: Nickel-metal hydride battery technology provides environmentally responsible power solution.
Get in touch for pricing & availability
Contact our orthopedic specialists to discuss the BJ4101 Sagittal Saw system configuration, custom blade options, and volume pricing for your institution.
Email: info@tedsmedical.com
Related Products
– BJ4106 Sternum saw for thoracic surgery applications
– Autoclavable and low noise design for efficient and safe use
– Output power ≥110w with oscillations up to 15000 osc/min
– Comes with a handpiece, battery, charger, saw blade, and more
– 2-year warranty on handpiece and 3 months on fast consumption items
– Dual function canulate drill for intramedullary interlocking nail surgery or arthroscopic surgery
– Autoclavable and imported motor for durability and high performance
– Output power ≥90w with adjustable speed settings
– Includes handpiece, battery, charger, aseptic battery transfer ring, operating manual, and guarantee card
– Autoclavable cannulated drill for K-wires, interlocking nail, and arthroscopic surgeries
– Imported motor for low noise, high speed, and proper alignment
– Output power ≥90w, speed 0-630 (Default) / 0-1000 (Customized), torque 3.6 Nm
– Warranty: 2 years for the machine; handpiece guarantee for 2 years, battery and fast consumption items for 3 months
– BJ4104 Cranial drill for cranial surgery
– Autoclavable with imported motor for low noise and long service life
– Output power of 110W, speed range of 0-1100 r.p.m, and torque of 3.3 Nm
– Comes with one handpiece, battery, charger, cranial drill bit, and more
– 2-year warranty on the handpiece, 3 months on battery and fast consumption items
– Acetabulum reaming drill for joint surgery
– Autoclavable, imported motor with low noise and high torque
– Customizable interfaces for different factory’s shaft and reamer
– Output power ≥85w, speed 0-350 r.p.m, torque 7.8 Nm, operation voltage 14.4V
– Ideal for knee joint and hip surgeries operated by robots
– Autoclavable unit with imported motor for low noise and quick cutting
– 95w output power with 0-15000 oscillations per minute
– Comes with a 2-year warranty and standard configuration including handpiece, battery, charger, saw blade, and more
– Acetabulum reaming drill for joint surgery
– Autoclavable with imported motor for low noise and high torque
– Customizable interfaces for different factory shafts and reamers
– Output power ≥85w, speed up to 350 r.p.m, torque 7.8 Nm
– Autoclavable bone drill for trauma surgery
– Imported motor with low noise and high speed
– Output power of 110w and torque of 3.2 Nm
– Warranty for 2 years
– High power output of 110w
– Adjustable speed from 0-1100 r.p.m
– Lightweight design with ergonomic shape
– Autoclavable for easy sterilization
– Low noise level of ≤40 db
– Long service life with a 2-year warranty period
– Dual function canulate drill suitable for K-wires and intramedullary interlocking nail surgery
– Ergonomic design with autoclavable components for easy sterilization
– High power output (≥90w) with low noise operation (≤40 db)
– Comes with a handpiece, battery, charger, aseptic battery transfer ring, manual, and guarantee card
– BJ4105 Cranial bur for cranial surgery applications
– Autoclavable with imported motor for low noise and high speed operation
– Output power of 90W and speed up to 60000 r.p.m
– Comes with handpiece, battery, charger, bur blade, and more